矿粉压球机价格（The price of powder ball press）.doc

矿粉压球机价格（The price of powder ball press） Model KD360 ball press This is a compact ball press of type 360. All powder materials need to be compressed into balls or other shapes for the purpose of transportation, environmental protection and smelting. They need to be compressed into balls and need to be pressed by a ball press. Such as: coal, coke powder of various non-ferrous metal powder, black iron oxide and dust, sludge, refractory material etc.. We develop more applicable ball press equipment according to the needs of users. Model KD400 ball press The ball press equipment uses hydraulic protection device: hydraulic pump will press the high-pressure oil into the hydraulic cylinder, so that the piston axial displacement. The front end of the piston rod is attached to the bearing seat to meet the production pressure requirements. When the pressure between the two roller feeding too much or into the metal block, the piston rod of the hydraulic cylinder pressure overload, hydraulic pump will stop, accumulator has buffering effect on the pressure relief valve to open the oil return, the piston rod roller gap displacement increase so hard by pressure roller, pressure recovery system normal, can protect the roller damage. Model KD430 ball press Structure characteristics: 1, Feng 430 molding machine forming roller, I use the latest development of the factory, the most advanced sets of embedded structure, on-site disassembly and assembly, 2-3 hours to complete, very convenient. One can avoid roller and wheel interference fit and easy to cause the locking phenomenon. Two, the form of hot charging can be avoided. When the roller is replaced, the utility model needs to be disassembled and sent to the manufacturer, and the roll leather can be pushed out and replaced by a press. The utility model saves the cost, saves the freight and saves time and labor. 2, roller selection of high quality alloy steel forgings blank production, the overall quenching treatment, hardness can reac