房建工程钢管敷设施工工艺(Construction technology of steel pipe laying in housing construction project).doc

房建工程钢管敷设施工工艺(Construction technology of steel pipe laying in housing construction project).doc

  1. 1、本文档共19页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
房建工程钢管敷设施工工艺(Construction technology of steel pipe laying in housing construction project) The range of 1 This technology is applicable to steel tube lighting and power distribution of light and dark in the ceiling and wall panels and laying in pipe laying engineering. 2 construction ready 2.1 material requirements: 2.1.1 galvanized steel pipe (or pipe) uniform wall thickness, weld uniform, without splitting, trachoma, stabbed and concave edge flat phenomenon. In addition to other pipes need to pre galvanized pipe rust corrosion paint brush (buried cast-in-place concrete, no corrosion paint brush, but rust) pipe surface layer integrity of galvanized pipe or brush anti-corrosive paint, no peeling phenomenon, should have a single material and product certificate. 2.1.2 use harness hoop hoop. Silk and clear not buckle, galvanized layer integrity without flaking, without splitting, both smooth and burr free, and have a product certificate. 2.1.3 lock nuts (root parent) shape intact, are clear, and have a product certificate. 2.1.4 mouth has used to distinguish between thin and thick tube, the mouth should be intact, and have a product certificate. 2.1.5 iron lamp box, switch box, junction box, metal plate thickness should be not less than 1.2mm, galvanized layer without peeling, no distortion welding, knock off holes intact, panel mounting hole and the wire welding foot is complete, and product certification. The 2.1.6 panel and cover board specifications, high and wide, the mounting hole should be set with the box shape intact, surface color uniformity, and product certification. 2.1.7 round steel, flat steel, angle steel and other material shall comply with relevant national standard requirements, the galvanized layer intact, and have a product certificate. 2.1.8 bolts, screws, bolts, nuts, washers tube should be galvanized parts. 2.1.9 other materials (such as lead wire, welding rod, antirust paint, cement, oil etc.) without deterioration expired. 2.2 main equipments

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档