混凝土结构的加固 砌体结构的加固 钢结构加固 )（Reinforcement of concrete structure, reinforcement of masonry structure and reinforcement of steel structure）.doc

混凝土结构的加固 砌体结构的加固 钢结构加固 )（Reinforcement of concrete structure, reinforcement of masonry structure and reinforcement of steel structure） Abstract: structure in the long-term natural environment and the role of the environment, its function will gradually weaken, our design work structure engineering task not only to make the building early, objective law and the degree of damage assessment of structure but also to science, and take effective measures to ensure the safety of the structure is used, then the structure the reinforcement will become an important work. It is foreseeable in twenty-first Century, human building also to concrete structure, steel structure, masonry structure, at this stage, I think we in structure reinforcement this aspect research should also take this as the main breakthrough direction. Keywords: reinforcement steel reinforcement of masonry concrete structure Reinforced concrete structure is divided into two types of direct and indirect reinforcement, design can be based on actual conditions and requirements of selection methods and supporting appropriate technology. Reinforced concrete structure article A general method, the direct reinforcement: 1, increase cross-section reinforcement method Flexural compressive zone with cast-in-place concrete layer in reinforced concrete, can increase the effective height of cross section, enlarging section area, so as to improve the flexural member, shear capacity and stiffness of oblique section, to reinforce the role of. The optimum reinforcement range increased with the area of reinforcement and the intensity of normal section bearing capacity of concrete bending member. When the reinforcement rate is not too high in the original component right section, increasing main reinforcement area can effectively improve the original component of flexural capacity of normal section. In the cross section of the tension zone and cast-in-place concrete jacket to increase the component section, through the new par