An Equivalent Circuit Model for Meanderline （弯折线的等效电路模型）.pdf

Proceedings of ISAP2012, Nagoya, Japan 4C3-1 An Equivalent Circuit Model for Meander-line Monopole Antenna Attached to Metallic Plate # 1 1 1 1 Ryouhei Hosono , Ning Guan , Hiroiku Tayama , and Hirotaka Furuya 1 Optics and Electronics Laboratory, Fujikura Ltd. 1440, Mutsuzaki, Sakura, 285-8550, Japan, ryohei.hosono@ 1. Introduction Equivalent circuit models are useful for antenna design because exact electromagnetic simulation generally needs complicated settings and heavy computation. Especially the equivalent circuit modelling with consideration of the antenna installation on devices is very helpful from practical point of view. Several antennas are modelled by equivalent circuit models with fitted parameters. A lumped circuit model is constructed for a dipole antenna by considering length and losses of the dipole as precise as possible and the circuit parameters are determined by using an optimization theory of genetic algorithm (GA) [1]. A lumped circuit model is also constructed for a rectangular and E-shaped microstrip antenna by minimizing an error function which consists of simulated and measured input impedances [2]. Circuit parameters of a lumped circuit and a transmission line are determined for a planar slot antenna by fitting the EM simulated results [3]. Howeve