CHEMICAL RESISTANCE TABLE Ansell （表Ansell耐化学性）.pdf

CHEMICAL RESISTANCE TABLE Ansell Protective Solutions AB Johan Kocksgatan 10, SE-231 81 Trelleborg, Sweden Tel: +46 410 510 00, Fax: +46 410 518 50 | orderprotective@ Chemical resistance table - guidance The table below may be used as a quick reference table for a preliminary as- sessment of the chemical resistance of the suit to a specific chemical. The term “chemical resistance” in this section is not to be interpreted as permeation breakthrough time. For each chemical the suit materials have been assigned one of five numbers indicating a resistance grade, see below. The grade as- signed for each chemical has been based on the possible risk of permeation, penetration as well as degradation. In this way it is more of a total evaluation of the chemical resistance in all aspects, not only permeation breakthrough time. The grades are based upon tests, available literature, material supplier information etc. The table covers the chemical substances that are most frequently transported. Each substance is identified by the UN convention number. Resistance grades are based on tests and estimations of the capacity of the materials in Trellchem® suits to withstand contact with the chemicals in liquid form or in high gas concentrations at room temperature. Resistance grades for liquids refer to contact with the chemical in liquid form, with the exception of some cold liquids. NOTE 1! Resistance time decreases as temperature increases. NOTE 2! The resistance table cannot be used to evaluate the resistance of materials other than those in Trellchem® chemical suits. NOTE 3! This table is not being updated and is not complete. 2 How to read the chemical resistance table The UN number of a chemical can be identified by consulting the alphabe- tical index on page 4. The resistance grade can then be identified under the UN number in the list on page 12. Resistance grades for the