DESIGN AND IMPLIMENTATION OF （设计和开发的）.pdf

Volume I, Issue III, August 2014 IJRSI ISSN 2321 –2705 Design and Implementation of Monitoring and Controlling Three-Phase Multi-Motor Drive Systems in Gantry Cranes Using PLC and SCADA Vijaykumar V Dr. Sidheshwar Prasad The Oxford College of Engineering, banglore Professor, Dept EEE, TOCE Banglore Abstract— Gantry cranes are typically used for moving weights. SCADA techniques are used for monitoring and containers, loading trucks or material storage anywhere. data acquisition and used as a communicating tool Depending upon the capacity of crane, each has multi- between the client, PLC and other control systems of the motor drive to describe the technological processes. This crane. presents crane with multi-motor drive systems for conducting full operation with its distinct movement. PLC Electrical technology for crane control has undergone program is used to control three-motors as per the a significant change during the last few decades. The movement of weights of operation. SCADA is used as a communication tool between the client, PLC, and other shift from Ward Leonard system to DC drive technology control operations. The MICROMASTER420 drive is used and the advent of powerful Insulated Gate Bipolar to control the speed of motors and