I-ANR-275D INSTALLATION OPERATING ... - （i - anr - 275 d的安装和操作。）.pdfVIP

I-ANR-275D INSTALLATION OPERATING INSTRUCTIONS for SUNNEN® ANR-275 REMOTE-FEED HONE Includes Repair Parts List GENERAL POWER SOURCE The ANR-275 Hone has been designed to hone bores Use heavy duty electric drill in a honing rig, or drill from 2.50 to 21.00 in. (64 - 533 mm) diameter. press (see Figure 1). To establish optimum rpm for your application, divide 800 by the hole diameter in NOTE: For light work in bores larger than 10 in. inches. (254 mm) in diameter. Example: 800 + 4 = 200 (rpm); or divide 20,000 by the hole diameter in Millimeters. INSTALLATION Example: 20,000 + 100mm = 200 (rpm). The Remote-Feed Hones are designed for use in a rigid installation, such as a drill press or a honing Hole Size Recommended Drill rig, where part to be honed and power source are 2.5 to 5 in. (63 - 130mm) . . . . 5/8 in. (15mm) capacity rigidly fixed (see Figure 1). The ANR-275 is 5 to 15 in. (130 - 380mrn) . . . . . 3/4 (19mm) capacity equipped with two Universal Joints which allow 15 in. up (380mm up) . . . . . . . . 1 (25mm) capacity the honing head to align itself with the workpiece. FIGURE 1, Honing Rig SUNNEN® PRODUCTS COMPANY • 7910 MANCHESTER ROAD • ST. LOUIS, MO 63143, U.S.A. • PHONE: 31