POLARIZATION MAINTAINING FUSED FIBER （偏振保持光纤融合）.pdfVIP

POLARIZATION MAINTAINING FUSED FIBER COUPLERS / SPLITTERS Applications • Optical amplifiers • Fiber lasers • Power monitoring • Fiber gyroscopes • Coherent communications Fused Splitter with 0.25 mm jacket OD. Key Features • Low loss and cost • Broad bandwidth • Good uniformity • Small package • High directivity • Wide variety of wavelengths 780 nm–2005 nm Fused Splitter with 0.9 mm jacket OD. Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting Fused Splitter with 3 mm Cable. ratio. These devices are bidirectional and offer low backreflection and insertion losses. All dimensions are in mm OZ Optics’ fused PM Splitters exhibit a broad operating wavelength range of up to ±20 nm for 1550 nm region devices. For operation within the standard bandwidth of a splitter, it is best to order a standard center wavelength for lowest price and quickest delivery. 54 or 70 mm Fused PM splitters are also available on smaller core fibers for 1064 nm,