Potential Flow NYU Tandon School of （潜在的流动纽约大学经脉的学校）.pdfVIP

CBE 6333, R. Levicky 1 Potential Flow Part I. Theoretical Background. Potential Flow. Potential flow is irrotational flow. Irrotational flows are often characterized by negligible viscosity effects. Viscous effects become negligible, for example, for flows at high Reynolds number that are dominated by convective transport of momentum. Thus potential flow is often useful for analyzing external flows over solid surfaces or objects at high Re, provided the flows still remain laminar. Moreover, when the flow over a surface is rapid (high Re), the viscous boundary layer region (within which potential flow would be a bad assumption) that forms next to the solid body is very thin. Then, to a very good approximation, the presence of the boundary layer can be neglected when analyzing the potential flow region. That is, the potential flow can be assumed to follow the contours of the solid surface, as if the boundary layer was not present. When the thickness of the boundary layer is small compared to the dimensions of the object over which the potential flow is occurring, we can proceed as follows to analyze the total (potential flow + boundary layer flow) problem: i). First, determine the velocities and pressure distribution in the potential flow region, assuming that the potential flow extends all the way to any solid surfaces present (ie. neglecting the presence of the boundary layer). ii). Solve the flow inside the boundary layer using the pressure distribution obtained from the potential flow solution (i) as input. In other words, the potential flow imposes the pressure on the boundary layer (see the earlier discussion of boundary layers). At the edge of the boundary layer, the velocities are matched with those obtained from the potential flow solution (i) through the use of appropriate bou