fluent 经典问题 Fluent 收敛判断和 solver选择.docx

Fluent 收敛判断和 solver选择从上转过来的，虽然是英语，但是静下心来慢慢读一读能学到很多问题：----------------------------Hi! I have tried an external aerodynamic problem in Flunet. In it, I want to know pressure distribution over the wing assembly.I have used Coupled-Implicit-Spalart Allamaras solver with courant number 1 initially. I gave pressure-far-field BC in elliptical boundary around wing assembly which is 10 times larger.After 5000 iterations also, my solution is not converging or continuity and momentum residuals are not coming below 1e-3. They oscillating between 1e-2 and 1e-3. Viscous residual is less than 1e-3.I have changed under relaxation factors, discretization schemes also. Still, I am not able to achieve residual lesser than 1e-4.I want any one users help. I am conveying my advance thanks ..........with regards, vengi.某人的回答Theres a few things that could be going on.One possible answer is that your model is converged (thats always the happiest answer, isnt it?). The residuals you are looking at are normalized based on the residuals of the first iteration. So if your initial guess is pretty accurate, then your first residuals will be small, and all of your following residuals will be small as well, but since they are normalized according to that first small value, they look large. This typically shows up in the continuity and momentum residuals, and sometimes even in the x, y, and z velocity residuals (at least in the coupled solver). One thing you should be doing with your model is monitoring other factors besides your residuals. If youre looking for the pressure distribution, then define a few points along your airfoil and monitor the pressure at these points. You should also monitor at least the lift of your airfoil. You can find these monitors under solve-monitors. Judge convergence by when these have leveled off. While your model is solving, you will probably have to go in and clear the data in the monitors or adjust the scale of the axis to get a better idea of when theyve truly leve