利用UG进行连接座后盖的三维模型及注塑模具设计【含CAD图纸】.docVIP

连接座三维造型及注塑模设计 摘 要 该设计为用UG3.0进行连接座注塑模具设计，体现了UG3.0在注塑模具设计过程中的一般方法。通过该连接座产品模具的设计使设计者进一步巩固了注塑模基础知识，熟悉使用UG3.0进行注塑模具设计的一般过程，提高了软件运用能力。 设计过程中首先分析设计任务书中产品二维图，对产品进行造型设计，然后通过对产品的特征分析确定模具设计的思路。最后根据产品模型，运用UG3.0中Moid Wizard模块对连接座模具进行设计。重点体现了UG3.0/Moid Wizard模块部分的应用。 UG3.0/Moid Wizard是针对注塑模具设计的一个过程应用,它将型腔和模架库的设计统一到整个连接过程中，为设计模具的型腔、型心、滑块、提升装置和嵌件提升高级建模工具,最终目的是快速、方便地建立与产品参数相关的三维实体模具,并将之用于加工。 关键词：UG3.0 注塑模具 建模  Abstract The design for linking with UG3.0 Block Injection Mold Design, UG3.0 reflected in the injection mold design process in general. Block, through the connection of the die design products enable designers to further consolidate the injection mold basic knowledge, UG3.0 familiar with the use of injection mold for the general design process, enhance the ability to use the software. First the design process analysis and design tasks products 2D map book, the product modeling design, Then the characteristics of the product analysis mold design ideas. Finally, according to product model, which use UG3.0 Moid Wizard module to connect Block mold design. Focus reflects the UG3.0/Moid Wizard module of the application. UG3.0/Moid Wizard against injection mold design an application process, It will die-cavity and the design of the unity of the whole process of connecting to the design of the mold cavity, heart-type, slider, upgrade equipment and upgrade inlay pieces High modeling tools, with the ultimate aim is rapid, to facilitate the establishment and product parameters related to the 3D mold, and use them for processing. Key words : UG3.0 injection mold modeling  目 录 摘要……………………………………………………………………………..………I 绪论……………………………………………………………………………………1 1.模具行业发展现状及发展趋势………………………………………………………2.UG及其在模具设计工程中的应用…………………………………………………2 3.关于连接座注塑模具设计……………………………………………………………4 4.本课题的意义、目的及应达到的要求………………………………………………4 第1章 零件结构及工艺分析……………………………………………………… …6 1.1 分型面的选择………………………………………………………………………6 1.2 型腔布局……………………………………………………………………………7 1.3 浇注系统设计………………………………………………………………………7 1.4 推出机构设计……………………