2008 Standard for Method of Measuring （2008标准的测量方法）.pdf

ANSI/AHRI Standard 575 (Formerly ARI Standard 575) 2008 Standard for Method of Measuring Machinery Sound Within an Equipment Space Price $15.00 (M) $30.00 (NM) 8Copyright 1994, by Air-Conditioning and Refrigeration Institute Printed in U.S.A. Registered United States Patent and Trademark Office IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or guarantee the safety of any products, components or systems designed, tested, rated, installed or operated in accordance with this standard/guideline. It is strongly recommended that products be designed, constructed, assembled, installed and operated in accordance with nationally recognized safety standards and code requirements appropriate for products covered by this standard/guideline. AHRI uses its best efforts to develop standards/guidelines employing state-of-the-art and accepted industry practices. AHRI does not certify or guarantee that any tests conducted under its standards/guidelines will be non-hazardous or free from risk. FOREWORD This document establishes a uniform method of measuring the sound levels produced by air-conditioning and refrigerating machinery installed in mechanical equipment spaces. However, it should be emphasized that this standard was developed for use where the test conditions usually cannot be controlled, e.g., ambient temperature; equipment loading; physical attributes of the space; background sound sources, etc. Since the results obtained m