Base Plate and Anchor Rod Design Texas AM （底座和地脚螺栓设计德州农工大学）.pdf

Steel Design Guide 1 Base Plate and Anchor Rod Design Second Edition JAMES M. FISHER, Ph.D., P.E. Computerized Structural Design, S.C. Milwaukee, Wisconsin and LAWRENCE A. KLOIBER, P.E. LeJuene Steel Company Minneapolis, Minnesota AMERICAN INSTITUTE OF STEEL CONSTRUCTION, INC. 1.0 INTRODUCTION Column base plate connections are the critical interface the equations shown herein are independent of the load ap- between the steel structure and the foundation. These con- proach and thus are applicable to either design methodology. nections are used in buildings to support gravity loads and These are shown in singular format. Other derived equations function as part of lateral-load-resisting systems. In addition, are based on the particular load approach and are presented they are used for mounting of equipment and in outdoor sup- in a side-by-side format of comparable equations for LRFD port structures, where they may be affected by vibration and or ASD application. fatigue due to wind loads. The typical components of a column base are shown in Base plates and anchor rods are often the last structural Figure 1.1. steel items to be designed but are the first items