TIG焊熔池三维表面及其数值模拟的研究现状.PDF

网络出版时间：2015-12-09 09:56:38 网络出版地址：/kcms/detail/61.1133.TG0956.002.html Hot Working Technology 20 15,Vol.44 ,No.23 荫 综述荫 TIG 焊熔池三维表面及其数值模拟的研究现状 1 1 2 1 1 黄健康 袁何笑英 袁扶剑锋 袁石玗 袁樊丁 渊1. 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室袁 甘肃兰州730050 曰2. 长沙众泰汽车工业有限 公司袁湖南长沙4 10100冤 摘 要 熔池三维表面的研究工作日益受到关注袁尤其是TIG 焊熔池表面变化速度快袁以及熔池表面的类镜面特性 及强弧光的干扰等袁一直给许多研究者在熔池方面的研究工作带来了一定的困难遥 本文对于目前主要运用于TIG 熔池 三维表面研究的方法及其优缺 进行了综述袁此外袁也阐述了数值模拟方法运用于熔池三维表面研究的进展遥 关键词 TIG 焊曰熔池曰三维表面曰数值模拟 DOI: 10.14158/j. cnki. 1001-3814. 2015. 23. 002 中图分类号 TG409 文献标识码 A 文章编号 100 1-38 14(2015)23-0006-04 Present Research Status of Tungsten Inert Gas Welding Weld Pool 3D Surface and Numerical Simulation 1 1 2 1 1 HUANG Jiankang , HE Xiaoying , FU Jianfeng , SHI Yu , FAN Ding (1. State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China; 2. Changsha Zotye Auto Industry Co., Ltd., Changsha 4 10 100, China) Abstract 院The three-dimensional weld pool surface is increasingly given attention to research work, especially the general characteristics of the weld pool change fast, the specular surface reflects the characteristics and strong arc interference. Thus, some difficulties might be brougth up as research work is being carried out in welding pool. The advantages and disadvantages of the methods were described, which could apply to TIG welding weld pool three-d