PSRPSRT系列精密滚珠丝杆-KSSJAPAN.PDFVIP

NEW 新产品 PSR / PSRT 系列 精密滚珠丝杆 PSR / PSRT Series Precision Ball Screws 我司以 多年的装配经验及新的冷轧加工技术开发出精密级（ 滚珠丝杆。 30 JIS C5） 系列产品实现了精密级（ 精度的同时，还达到了一般的精密级滚珠丝 PSRT JIS C5） 杆无法做到的价格水平。（*以我司产品对比为准） KSS has developed Precision Rolled Ball Screws with JIS C5 class based on the new technology of Rolling and process know-how over 30 years. PSRT series Ball Screws achieve high accuracy grade （JIS C5） and price range is far less expensive than the one of Ground Ball Screws. ●特点 ·以往只能达到 的冷轧加工，我司实现了精密级（ ）的精度。 Ct7，Ct10 JIS C5 （PSRT系列） ·轴端比丝杠轴粗，从而无需另配轴环，热套等。 （PSRT系列） ·标准化轴端形状及尺寸，可直接安装KSS特制支撑单元。 ·轴端（固定侧和支撑侧）都已按标准生产完工。只需指定目录上的型号即可短交期供货。 ·轴向间隙标准设定为5um 以下，但是可按客户要求供应零间隙（带预压）的产品。 ·可按客户要求调整长度以及加工成非标准轴端形状。 ●Features ・The conventional type of Rolled Ball Screws can reach the accuracy grade of Ct10 or Ct7. KSS newly developed the high grade accuracy of Rolled Ball Screw, which can achieve JIS C5 grade. ・Fixed side end ‐journal can be set larger than nominal diameter of Screw Shaft, so there is no need to use Collar by press fit.（PSRT Series only） ・End ‐journal profile and dimension are standardized, so KSS Compact Support ‐Unit can be installed.（PSRT Series only） ・Whole of Ball Screw including both end-journals is standardized and machined, order is simple to designate the model number in this catalogue and short delivery is possible. ・The Axial play is set at 5um or less, but Zero backlash is possible by your request. ・Special end-journal profile and length modify can be available as cust