自粘性直焊漆包线的涂漆与烘焙工艺研究.pdfVIP

48 缪 飞等：自粘性直焊漆包线的涂漆与烘焙工艺研究 绝缘材料 2012 ，45(2) 自粘性直焊漆包线的涂漆与烘焙工艺研究 1 2 1 2 1 缪 飞 ，盛俊凯 ，麦裕良 ，叶炽德 ，栾安博 （1. 广东省石油化工研究院，广州 510665 ； 2. 东莞泽龙线缆有限公司 广东省漆包线工程技术研究开发中心，广东 东莞 523320） 摘要：以漆包工艺中的涂漆与烘焙两个重要环节作为研究对象，研究了聚氨酯底漆和聚酰胺自粘漆的不同涂 漆与烘焙工艺对漆包线性能的影响，总结得出漆最适宜涂制的线型规格为0.350 mm ，最佳的涂漆与烘焙工艺 为：底漆涂线10道，面漆涂线3 道，采用单炉膛固化，行线速度54 m/min ，炉温曲线310 ℃/370 ℃/390 ℃，交换 风速560 r/min ，排废速度300 r/min 。所生产的自粘性直焊漆包线各项技术指标均满足用户需求，热性能数据 达到直焊性180级耐热等级的要求。 关键词：自粘性漆包线；直焊性；涂漆工艺；烘焙工艺；聚氨酯；聚酰胺 中图分类号：TM245.1 文献标志码：A 文章编号：1009-9239（2012 ）02-0048-05 Painting and Curing Process of Self-adhesive Direct-welding Enameled Wire 1 2 1 2 1 Miao Fei , Sheng Junkai , Mai Yuliang , Ye Chide , Luan Anbo (1.Guangdong Research Institute of Petrochemical Industry, Guangzhou 510665, China; 2.Dongguan Jeton Cable Co., Ltd, Guangdong Provincial Enameled Wire Engineering Technology Research and Development Center, Dongguan 523320, China) Abstract: Two important processes in enameling process, painting and curing, were used as research ob- ject to study the effect of different painting and curing process of polyurethane primer and ployamide self-adhesive paint on the performance of enameled wire. The results show that the most suitable wire di- mension is 0.350mm, and the best painting and curing processes are as follows: 10 primers and 3 finish coats, single-furnace curing, 54m/min of wire speed, 310 ℃/370 ℃/390 ℃ of furnace temperature, 560r/ min of switching wind speed and 300r/min of waste discharge speed. The technical index of the self-ad- hesive direct