阻燃电缆（Flame retardant cable）.docVIP

阻燃电缆（Flame retardant cable） Structure features of flame retardant cable The structure of flame retardant cable is basically the same as that of ordinary cable. The difference is that its insulating layer, sheath, outer protective layer and auxiliary material (bag, belt and filling) are all or partly made of flame retardant material. Classification of flame retardant cables According to the cable flame retardant material, flame retardant cable is divided into halogen flame retardant cable and halogen free low smoke flame retardant cable two categories. Among them, halogen containing flame retardant cable insulation layer, sheath, outer protective layer and auxiliary materials (bag, belt and filling), all or part of the halogen containing polyethylene (PVC) flame retardant material, so it has good flame retardant characteristics. However, a large amount of smoke and halogen acid gas are released when the cable is burned, and the halogen acid gas has a corrosive hazard to the surrounding electrical equipment. The rescue personnel need to bring gas masks to be able to approach the scene to extinguish the fire. When the cable is burning, it is harmful to the surrounding electrical equipment and rescue personnel, and is not conducive to fire fighting and rescue work, thus causing serious two hazards. The insulation layer and sheath and the outer sheath and auxiliary materials and low smoke HFFR cable (bag and filling) in whole or in part is used in crosslinked polyethylene (XLPE) containing no halogen flame retardant, flame retardant properties has not only better, and in burning without halogen acid gas emitted smoke the amount of the cable is small, between the corrosive gases produced by the combustion of a cable or cable of flame retardant and reduce the amount of halogen acid gas to compromise the way developed low smoke and low halogen flame retardant cable. Its halogen content is about 1 / 3 of halogen resistant flame retardant cable. The smoke rate is also close t