19个主动报错的电脑启故障现象分析(Fault analysis of 19 active false computers).doc

19个主动报错的电脑启故障现象分析(Fault analysis of 19 active false computers).doc

  1. 1、本文档共8页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
19个主动报错的电脑启故障现象分析(Fault analysis of 19 active false computers)

19个主动报错的电脑启故障现象分析(Fault analysis of 19 active false computers) Start the computer, if you find a problem, it will take the initiative to report errors. The main information is as follows: (1) Bad CMOS Battery shows that the CMOS battery in the host is under powered. (2) Cache Controller Error illustrates: Cache Memory controller is corrupted. (3) Cache Memory Error illustrates: Cache Memory running error. (4) CMOS, Checks, UM, Error: CMOS RAM memory error, please rerun CMOS SETUP. (5) Diskette Drive Controller Error: the cause of the error message appears: a floppy drive is not connected with the power supply; two is connected between the signal line of the floppy disk drive and I/O card is not properly connected; three floppy drive is damaged; four multifunction card is damaged; five CMOS floppy drive parameter settings wrong. (6) Display Card Mismatch: the host display card does not match the system settings. (7) Equipment Config Ration Error: hardware device parameter is not correct, reset CMOS. (8) Fixed Disk Controller Error explains that the reason for the error information may be: first, the hard disk does not receive the power supply; two, the connection between the hard disk signal line and the I/O card is not correct; three, the hard disk is damaged. (9) Fixed Disk 0 Error: hard disk 0 track damage. (10) Insert, System, Diskette, Press, ENTER, Key, To, Reboot: there is no system boot disk. (11) I/O Parity Error: the input and output program is not running correctly. (12) Keyboard Error: keyboard connection error or keyboard corruption. (13) Memory Error illustrates: DRAM, SIMM, or additional memory bars on the motherboard are corrupted. (14) Memory Size Mismatch: the memory capacity detected by the system does not correspond with the actual memory. (15) Press, Fl, To, Continue, or, Ctrl+Alt+ESC, For, SETUP: system settings error. (16) Protected, Mode, Test, Fail: CPU protected mode error. In this case, the system can still run in the real mode (Real, Mode)

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档