监控摄像机的一些故障和原因.docVIP

监控摄像机的一些故障和原因 In recent years, with the rapid development of video surveillance and monitoring equipment are constantly improved, do not say anything else, only is the front-end image acquisition equipment in continuous evolution, from the box camera to camera, integrated camera from infrared camera to monitor, from day to night monitoring. It should be said that the overall development is along the direction of digitalization and intelligentization and all-weather monitoring direction, IP camera and infrared camera to replace the ordinary bolt camera and camera has become an inevitable trend. Technically, megapixels network camera basically solves the problem of video image clarity, and infrared camera for visible light cameras and night monitoring problems. Because the infrared camera has concealed detection function, without producing visible light, and it can penetrate the smoke, fog, rain, clouds, can work continuously in a bad environment, develop quite rapidly. In foreign countries, the infrared camera has been widely used in the security system, video monitoring system become the star. In China, the Infrared Dome Camera with its low cost, convenient installation and other advantages of popular. But to welcome welcome, in the process of using the Infrared Dome Camera in the engineering business will encounter some unexpected problems, therefore, small collecting summarizes the Infrared Dome Camera in some common problems in the process of installation and use for reference: One problem: the Infrared Dome Camera series machine night illumination images, white or bright white halo phenomenon It should be said that the phenomenon is caused by improper assembly of the machine assembly, photosensitive device (photosensitive resistor) from the Infrared Dome Camera too far distance will lead to incomplete start infrared night illumination image caused by the machine; white or bright white aperture phenomenon mainly due to infrared light emitting tube infrared light