车床作业指导书（Lathe work instructions）.docVIP

车床作业指导书（Lathe work instructions） Lathe work instructions and operating procedures 1. Objective: clear responsibilities, ensure processing rationality, correctness and operability. Specification for safety operation, nip in the bud, to eliminate security risks in order to achieve safe production and quality assurance process. 2. scope: applicable to all lathe operator. 3. responsibilities: to guide the lathe operators processing and equipment maintenance, maintenance and other work. 4. working process 4.1. flow chart 4.1.2. view on operation plan 4.1.3. reading drawings and process 4.1.4. according to the drawings for materials or semi-finished parts 4.1.5. proofreaders and measuring tools; materials and semi-finished goods inspection Self checking and processing 4.1.6. 4.1.7.. 4.2. basic operation: 4.2.1. before the start of machine check: check the machine handle position and drive parts is reasonable, and wipe the sliding rail, with lubricating oil, the oil pool, oil box, oil cylinder cup etc. according to the provisions. 4.2.2. for car, check the front oil pump and oil level: headstock handle linked to the most low, boot to run for 3 minutes. And see if the oil window level reached 1/3 oil window position, or notify the relevant personnel according to the provisions of the gas. 4.2.3. view on operation plan: according to the work plan and work order scheduling requirements to meet production schedule. 4.2.4. reading: read the drawings and process drawings and process, determine the processing datum and processing steps; calculation, check materials specifications, processing required, such as measuring. 4.2.5. self inspection materials; proofreaders measuring: according to the drawings and process material and semi-finished products, check whether the material meets the requirements; for processing required, measuring and checking. 4.2.6. inspection: all the workpiece after all to carry out self, found the problem be solved immediately. 4.2.7.: the first piece in