ping命令（The ping command）.doc

ping命令（The ping command） Command format: Ping IP address or hostname [-t], [-a], [-n, count], [-l, size] Parameter meaning: -t constantly sends data to the target host; -a displays the network address of the target host in the IP address format; -n count specifies how many times the Ping is to be specified, and the exact number of times specified by count; -l size specifies the size of the packet that is sent to the target host. Ping is a very useful tool for testing network connection status and packet sending and receiving status. It is the most important part of network testing Frequently used commands. Ping sends a loopback request packet to the target host (address) and requests the target host to receive it A reply is given to determine the network response time and whether the machine is connected to the target host (address). If Ping is not successful, you can predict the failure in the following aspects: network fault, network adapter configuration is incorrect, The IP address is incorrect. If Ping is successful and the network is still unavailable, the problem is likely to be in the software configuration of the network system, Ping success can only guarantee that there is a connected physical path between the host and the target host. The use of the ping command Advanced usage of Ping For the Windows under the ping command I believe we are familiar with, but the Ping can function to most people is not a lot, of course, Im not saying that I can make the most of the Ping, I also just often use Ping this tool, also summarizes some experience, and now share with you. Now Ill refer to the help instructions for the ping command to tell you about the techniques Ill use when Im using Ping. Ping can be used only after the TCP/IP protocol has been installed: Ping [-t] [-a] [-n count] [-l length] [-f] [-i ttl] [-v tos] [-r count] [-s count] [-j computer-list], [-k computer-list] [-w timeout] destination-list Options: -t Ping, the, specified, host, until, stopped.To,