汽轮机调节保安系统（Steam turbine regulation and safety system）.docVIP

下载本文档

2
0
约3.15万字
约 22页
2017-08-18 发布于河南
举报
版权申诉

汽轮机调节保安系统（Steam turbine regulation and safety system）.doc

1、本文档共22页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

汽轮机调节保安系统（Steam turbine regulation and safety system）

汽轮机调节保安系统（Steam turbine regulation and safety system） 135MW intermediate reheat condensing turbine regulation and safety system 1. hydraulic system 1.1 overview The hydraulic system of the unit adopts low pressure turbine oil system, and the system pressure oil is supplied by the main oil pump driven by the main shaft of the turbine. The pressure is 1. 2Mpa. Adjust the oil circuit of the security system. See also D151. 00. 00-7. The system consists of the following oil filters, accumulators, point to point converters, oil engines, and starting valves. 1.2 oil filter The function of the oil filter is to filter the high pressure oil from the fuel supply system and supply the electro-hydraulic converter and the starting valve Equal use. The oil filter adopts double barrel oil filter, and the filter core can be changed on line. The filter core is 80u. With bypass valve, bypass valve opening pressure of 0. 12 + 0. 02Mpa. The system is equipped with differential pressure warning device, when the filter core is blocked and the pressure difference is greater than 0. 08Mpa alarm signal, indicating the need to replace the filter. 1.3 accumulator The hydraulic control system is equipped with two accumulators, both gas and liquid accumulators. They are installed on the energy storage bracket near the front bearing seat to stabilize the supply pressure of the hydraulic system. One side of the accumulator is charged with nitrogen pressure in advance, and any one of the other oil systems is isolated from the system so as to test, re inflate or repair. The accumulator has a pressure gauge on the side of the nitrogen to check the nitrogen pressure. The nitrogen pressure should be checked regularly and should be re charged if necessary. As the ambient temperature affects atmospheric pressure, the pressure should be checked after the ambient temperature is stable. Accumulator nitrogen normal working pressure is 0. 75Mpa can be read from the accumulator pressure gauge. At this point, t