电机学考试（Motor test）.docVIP

电机学考试（Motor test） First chapters 1.9 A DC motor, PN=4kW, UN=110V, nN=1000r/min, N=0.8. If the DC motor is a DC motor, calculate the rated current is IN; if the DC generator, then calculate IN. [solutions] The motor, according to the PN= UNIN N IN= =45.46 A. The generator, according to PN= UNIN, has IN=, =36.36, A 1.10 a DC motor PN, =17kW, UN=220V, N=0.83, nN=1500r/min. Input power at rated current and rated load. [solutions] According to the PN= UNIN N IN= =93.1A. Input power: P1=, UNIN, =220 * 93.1=20.48 kW 1.12 a DC motor, p=3, single stack winding, the total number of armature winding N=398, one pole magnetic flux is 2.1 x 10-2Wb. When the speed is n=1500r/min and the speed is n=500r/min, the induction electromotive force of the armature winding is calculated respectively. Ea. [solutions] P=a=3 * n=1500r/min dreams, 208.95V N=500r/min, 69.65V Rated capacity of PN=17kW 1.13 a DC generator, rated voltage UN=230V, rated speed nN=1500r/min, p=2 poles, the armature conductor number N=468, into a single wave winding air gap flux per pole with diameter of =1.03 * 10-2 Wb for: (1) rated current; (2) electromotive force. [solutions] (1) rated current: according to PN= UNIN, there is IN= =73.91A (2) armature electromotive force; Single wave winding a=1 dreams * 241.02V 1.14 a separately excited DC motor is connected to the 220V grid, known as a=1, p=2, N=372, phi, =1.1 * 10-2Wb, Ra=0.208, pFe=362W, pm=204W, nN=1500r/min, ignoring additional losses. O: (1) is this generator run by generator or by motor? (2) input power, electromagnetic power and efficiency; (3) electromagnetic torque, output torque and no-load torque. [solutions] (1) 204.6V dreams 204.6V 220V is a motor running R (2) input power, electromagnetic power and efficiency; Input power: P1= UNIN, according to U=Ea+IaRa 74.04A P1= UNIN =220 * * 74.04=16.29kW Electromagnetic power: Pem= EaIa=204.6 * 74.04=15.15 kW Output power: P2= kW PempFepm=15.150.3620.204=14.58 Efficiency: (3) electromagnetic torque, output to