d70遥控（D70 remote control）.docVIP

d70遥控（D70 remote control） RS485 PELCO-P\\D protocol (baud rate adjustable) to SONY-VISCA protocol converter Applicable to common 485 protocol matrix, hard disk video recorder, direct control keyboard, video server, codec code monitoring software PELCO, D, P Association SONY VISCA protocol for direct control of SONY high speed ball cameras, such as SONY, EVI-D70P, color video conference cameras. There is no need to use the original Install 4 wire system RS422 and RS232 control mode, but use monitoring system commonly used 2 wire system RS485 protocol control mode, using ordinary shielding two The core control line is ok. Through HK-D70, you can implement common control devices, Sony, D70P, Sony, d30 and Sony d31 to the Sony visca protocol Sony, D100 and other meetings monitor high-speed ball machine. I. Introduction of SONY-D70P communication This product mainly solves the problem that the SONY video conference camera can not be compatible with the surveillance video recorder, the matrix and the control keyboard system in the monitoring system . The original SONY-D70P communication protocol is a SONY-VISCA private protocol, and must be controlled by the SONY-VISCA dedicated control keyboard. If there is WANCON such conference terminal, you can directly control the VISCA class Yuntai, then it is very convenient, remote that Taiwan directly do sub control on All right。 The easiest way to implement remote control is to select the video server that supports the VISCA protocol and then install it on the remote PC Supporting software to achieve. In addition, D70P can be operated by remote control, and it can also be connected with PC through its RS232 communication interface Bit computer software control. But the remote control at a distance of 10 meters, only 15 meters RS232 control. Centralized control is often required in the system D70P video camera in a video conference room, which requires RS422 communication with D70P camera to achieve remote control, up to 1200 met