rcu运行模式（RCU operation mode）.docVIP

rcu运行模式（RCU operation mode） Room control system according to the individual needs of each hotel, a variety of customized operating mode, in order to realize the function of the smart control service, lighting, background music, air-conditioning system. The following example describes the mode and function of the system (Note: if the TCP/IP communication system, there is no part of the function of floor communications): 1, unmanned mode - in unattended mode in normal rooms rent no admission, RCU is now no electricity in the operation state;; - floor display and display rooms for communication software - RCU is now unmanned unmanned; power-saving operation state; - room air conditioners run in unattended mode, the network remote control. Can set the status of their work, in the end software such as: winter is set to 15 degrees, then the air conditioning will automatically open or close to maintain the room temperature is 15 degrees; the summer is set to 28 degrees, then the air conditioning will automatically open or close to maintain the room temperature is 28 degrees (temperature and wind speed can be set free in the end is provided with the software the parameters required to log on as administrator). If a floor or some room in the off-season when long-term rental, air conditioning in the software can be set to off, the maximum energy saving; - guest bathroom exhaust fan exhaust timing, keep indoor air fresh. 2, check in mode - in the hotel reception by software to view the operation status of equipment rooms, the normal rooms rented to guests. Guests at the front desk; check-in, electronic door cards, rooms into leased occupancy models (software obtained from the wine pipe); - air conditioning will be unmanned mode automatically switched to real mode, in the open room air conditioning mode, set the temperature to a comfortable temperature, such as the summer transfer is set to 24 degrees (the temperature value set in the terminal, and software) for the high-speed