spoolsv错误（Spoolsv error）.docVIP

spoolsv错误（Spoolsv error） Spoolsv.exe errors in the program memory could not be wrritten.2011-10-28 10:04 Spoolsv.exe Print Spooler is the process of management of all local and network print queues and control all print jobs. If this service is disabled on the local computer print will not be available. The process of Windows service system. ] [description of the problem in using the printer during sudden spoolsv.exe application error... Written... The memory could not be prompt, check print driver, printer settings cannot be opened. After the restart in the boot on the error. To effectively solve the recorded online operation method: 1, click start, click Run, type MMC, and then click ok. 2, on the file menu, click Add / delete management unit. 3, click the add, computer management, add, and then click finish, click close, and then click ok. 4, expand the computer management and the services and applications, and then click. 5, right click, and then click. (some time) 6, click start, click, in the open box type, and then click ok. And all the files in the%SystemRoot%\System32\spool\PRINTERS directory. 7, choose the service window (not close 3-4 in step), right click on the Print Spooler, and then click. 8, re executing the print operation,. In the use of the printer during sudden spoolsv.exe application error, memory can not be written check, print driver, printer settings cannot be opened. Suspected to be caused by the virus, antivirus software upgrade after the safe mode virus found no virus, after the restart or not, and the boot when the print service error. I run msconfig, check the print service is started, take a look at the Print Spooler service in my computer right management, is closed. I start to start it half wrong. Solve： Im sure in all methods after the failure of the print service is corrupt, online method is given to reinstall the system. I made one last effort before reinstalling the problem was finally settled. Methods: to enter safe mode, remove