逆变电源中自举供电驱动电路设计 design of bootstrap power drive circuit of inverter power supply.pdfVIP

工艺·技术·应用 逆变电源中自举供电驱动电路设计 魏 巍，王兴蔚，龚军勇，张怀武 （电子科技大学 微电子与固体电子学院，四川成都 610054 ） 摘 要：逆变电源作为一种大功率的电源装置，后级驱动电路的共通往往会使 H 桥场效应管发热甚至烧坏， 对逆变系统的性能有着十分重要的影响。分析了芯片 ir2110 作为后级驱动导致 H 桥共通产生的原因，同时利用 吸收缓冲电路和负压关断电路对逆变电源驱动电路的设计进行了优化，通过专业的电源设计与仿真软件 Saber 进行了仿真与验证，最终设计出了一种能很好防止共通的 H 桥驱动电路结构。 关键词：逆变电源；自举供电；驱动电路；设计；仿真 中图分类号：TM464 文献标识码：A 文章编号：1001-3830(2013)06-0063-04 Design of bootstrap power drive circuit of inverter power supply WEI Wei, WANG Xing-wei, GONG Jun-yong, ZHANG Huai-wu School of Micro-electronics and Solid-state Electronics, University of Electronic Science and Technology of China, Chengdu 610054, China Abstract: As a high-power supply apparatus, common conduction of the after-stage driver circuit of inverter power always makes MOS tubes of the H Bridge fever and even burn out, seriously affecting the performance of the inverter system. By analyzing the reason for common conduction of H Bridge of the after stage driver circuit of the ir2110 and making use of the snubber circuit and negative voltage shutdown circuit, optimized design of the power inverter driver circuit was given, and simulation and verification was conducted by software Saber. Finally, a better driver circuit of H Bridge was designed for preventing common conduction. Key words: inverter power; bootstrap power supply; drive circuit; design; simulation 出正弦波。H 桥MOSFET 管的驱动方法主要有两