消防稳压（Fire control）.docVIP

消防稳压（Fire control） Fire protection.Txt - two boats you pedal, you have really nice program. All that people do not want to love the heart filled with an impossible person. I love every unhappy but still laughing child. (if a person, see I know Im in stealth. Pump is not used for the sprinkler system and fire hydrant system is always pressure to the requirements of working conditions, once the flow can meet the required fire water and water pressure requirements. Its role is very clear, so the booster pump specification (magnetic pump, diaphragm pump, gear pump, screw pump, self-priming pump, centrifugal pump, chemical pump, sewage pump, multistage pump, oil pump, gear pump, hydraulic pump, pipeline pump, vacuum pump, fire pump, vortex pump, metering pump, piston pump, magnetic pump, gear pump, diaphragm pump, screw pump ), essentially refers to the pump, especially the automatic sprinkler pump system Pump flow value is determined by many factors, the more significant factors are: (1) the system type when the regulator from the spray pump for the system, consider a spray of water; used for fire hydrant systems, consider a fire hydrant in the water. (2) there is no pressure tank complete set no pressure tank complete set, calculation of pump flow regulator by not more than a water sprinkler or a fire hydrant. A pressure tank complete set, water supplement and pressure to ensure the system is to be implemented by air pressure tank, pump flow regulator can only meet the requirements of flow pressure tank, the pump flow regulator should consider the factors of adjusting the volume of air pressure tank. At this point, the pump flow should be regulated according to the volume of air pressure tank water supply equipment and the total volume of water in the tank and the calculation formula to determine. Pump out the water should be an average pressure when the tank is, not less than 1.2 times the maximum hours of network traffic. The provisions of the Regulations there is no