电脑提速设置方法.docVIP

电脑提速设置方法 1, accelerate the network neighborhood Open the registry editor, locate the HKEY_LOCAL_MACHINE/sofew Are/Microsoft/Windows/ Current Version/Explore/RemoteComputer/NameSpace, delete The {2227A280-3AEA-1069-A2DE08002B30309D} (printer) and {D6277990-4C6A-11CF8D 87- 00AA0060F5BF} (plan), restart the computer again, you will find the access network neighborhood, a lot faster. 2, the scroll bar to reduce boot time Open the registry editor, locate the HKEY_LOCAL_MACHINE\SYSTE M\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParame Ters, find the EnablePrefetcher key on the right, it is the default value of 3 to 1, so the scrolling time will be reduced. 3, to speed up the boot speed Find the HKEY_CURRENT_USER\Control Panel\Desktop, the AutoEndTasks value is set to 1; and There is a HungAppTimeout in the branch, its value to 4000 (or less), the default is 50000; Finally, find HKEY_LOCAL_MACHINE\ System\CurrentControlSet\Control\, similar to WaitT OKillServiceTimeout is set to 4000; through this set off a lot faster than. 4, remove the menu delay Find Men in HKEY_CURRENT_USER\Control Panel\Desktop UShowDelay primary key, its value to 0 can remove the menu delay effect. 5, improve the broadband speed In the start, enter the gpedit.msc run, open the group policy editor. Find the computer configuration and management, network template to QoS packet scheduler , select may retain the bandwidth limit , select properties to open may retain the bandwidth limit properties dialog box, select enabled . Note: this one must select enabled, then the reserved bandwidth is set to 0%. If set to disabled, is precisely the reserved bandwidth of 20%, it would be self defeating! ---------------------------------------------- Control panel - network connection - local connection attribute -interent protocol attribute using the following IP address IP address input 196.128.0.1 You can start looking for the IP address is in fact dead you set yourself a boot after the pr