质料员试题2（Material clerk questions 2）.docVIP

质料员试题2（Material clerk questions 2） The data of examination of basic knowledge and management practice. Source: the original site update time: 2011-3-30 click number: 127 To determine the problem (a total of 20 questions, each question 2 points) 1, interior finishes civil engineering using the natural granite stone, artificial wood and wood-based panels shall witness sampling. (V) 2, check in the decoration, decoration engineering materials, should pay attention to plastering test report of witnesssampling inspection of cement is complete. (*) 3, computer engineering data should be used to print the contents, way of signature. (V) 4, quality acceptance batch inspection shall be conducted by the general supervision engineer (professional construction unit project leader) organization project professional quality inspector for inspection and sign. (*) 5, section (sub section) project by the chief supervision engineer (construction unit project leader) project related design unit and construction unit organization responsible person in charge of quality and technology, jointly signed acceptance. (V) 6, the quality of the photocopies of the original content should be consistent with the original store, stamped with the official seal units, indicating the location of the original, and Attn signature and time. (V) 7, all the drainage pipes shall be ball test, and record (x) 8, the contractor only received the project supervision department signed the engineering change order, before the implementation of Engineering change. (V) 9, when the contractor uses new technology and new process, the engineer should review its provide proof materials and materials for the record book. (V) 10, the work stoppage caused by the construction unit, the construction unit should fill in the engineering reopenedbaoshen table for the resumption of work. (*) 11, there is the witness sampling inspection in the construction units under the supervision of supervision by the construction unit or