装修常见尺寸（Common size decoration）.docVIP

装修常见尺寸（Common size decoration） 1) tiles Common tile specifications are 600mm * 600mm and 500mm * 500mm, 400mm * 400mm, 300mm * 300mm. A rough calculation method: The room floor area, each tile area X (1+10%) = (10% in the number of brick type refers to the loss increase) The precise calculation method: The room floor area, each tile area X (I+10%) = (10% in the number of brick type refers to the loss increase) The precise calculation method: (the length of the room, brick (room width / length) * width = number of brick brick) With 5 m long, 4m wide room, using 400mm * 400mm specifications tiles as an example: 5m / 0.4m=12.5 block (13 blocks) 4m / 0.4m=10 block A total of 130 pieces of brick with 13 x 10 =. When the purchase of additional loss of about 3%---5%. 2) wallpaper Common wallpaper specification for each volume is 10m long, 0.53M wide. A rough calculation method: The total area of the ground area * 3= wallpaper The total area of 83019 wallpaper (0.53M * 10) = wallpaper volume number The precise calculation method: The length of each volume, component wallpaper room actual height = use number The total number of the perimeter of the room, wallpaper width = units The number of component volume number = total number, the use of units of the use of units of the use of wallpaper Because the wallpaper specifications fixed, therefore in the calculation of the amount of it, should pay attention to the actual use of wallpaper length, usually to the actual height minus the skirting board room and the height of the top line. In addition, the door of the room, the window area should be subtracted in the number of components used in the. This method is suitable for plain or finely flower wallpaper. Wallpaper collage considerations of flowers, the pattern is bigger, the greater the loss, so to buy more than the actual amount of about 10%. 3) composite floor Common specifications are 1.2m * 0.19M A rough calculation method: The room floor area / (1.2m * 0.19M * 105%= block