API 600-2014 钢制法兰和对焊连接闸阀.pdfVIP

Steel Gate Valves—Flanged and Butt-welding Ends, Bolted Bonnets Downstream Segment API STANDARD 600 THIRTEENTH EDITION, 2014 EFFECTIVE DATE:, 2014 2 API STANDARD 600 Steel Gate Valves—Flanged and Butt-welding Ends, Bolted Bonnets 1 Scope This International standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would indicate a need for full port openings, heavy wall sections and large stem diameters. This International standard sets forth the requirements for the following gate valve features: — bolted bonnet, — outside screw and yoke, — rising stems, — non-rising handwheels, — single or double gate, — wedge or parallel seating, — metallic seating surfaces, — flanged or butt-welding ends. It covers valves of the nominal pipe sizes DN: corresponding to nominal pipe sizes NPS: 1 1 1 — 1; 1 /4; 1 /2; 2; 2 /2; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42, and applies to pressure class designations: — 150; 300; 600; 900; 1500; 2500. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. API Specification 6D, Specification for Pipeline Valves API Standard 598, Valve Inspection and Testing 1 ASME B1.1 , Unified Inch Screw Threads (UN and UNR Thread Form) ASME B1.5, Acme Screw Threads ASME B1.8, Stub Acme Screw Threads ASME B1.12, Class 5 Interference—Fit Thread                                                              1 ASME International, 3 Park Ave