T形截面短肢剪力墙刚度及延性研究-地震工程与工程振动.PDF

30 1 Vo.l 30 No. 1 2010 2 JOURNAL OF EARTHQUAKE ENGINEER ING AND ENG INEERING V IBRATION Feb. 2010 : 1000- 1301( 2010) 01- 0104- 08 T 1, 2 1, 2 3 李青宁 , 李晓蕾 , 雷伟宁 ( 1. , 710055; 2, 710055; 3. , 710054 ) : T , , , , , , , , 8 : ; ; ; : TU375 : A Stiffn ess and ductility of short shear walls w ith T- shaped cross section 1, 2 1, 2 3 L IQ ingn ing , LI X iaolei , LEIW eining ( 1. School ofC ivil Engineering, X i anUniversity ofA rchitecture and Technology, X i an 710055, China; 2. K ey Laboratory of StructuralEngineering and Earthquake ResistanceM inistry of Education, Xi an 710055, China; 3. Hualu Eng ineering and T echnology Co. ltd. , X i an 710054, China) Abs tract: Based on the cyclic load tests on six short shearw alls and two p ieces ofw all in the general leve,l the de- struction of the short shearw allw as described. In the analysis of hysteresis curves and skeleton curves, w e found the process of the degradation of stiffness for the short shearw all specmi ens from the beginn ing of crack to failure fo-l low ing the changing of disp lacement and derived a formu la to smi ulate the degradation of stiffness by using the least squares methed, w e determ ined and compared the ductility of the samples. In addition, on the basis of the test re- su lt contrast of wt o common w alls, w e found that when the depth-th ickness ratios of the short shear w alls change from 8 to , the d ifferences of their performance are not large. K ey w ord s: degradation of stiffness; disp lacement ductility; hysteresis curve; least squares , 5~ 8 [ 1]