光达嘉业.txt（Ka.Txt lidar）.docVIP

光达嘉业.txt（Ka.Txt lidar） Power up initialization controller signal check Main inspection chip voltage is normal. 1. the main control chip and the voice board removed plate, while the RC500 card reader module is also removed, connected to the input power, voltage of two terminal measuring power switch input, if the power supply voltage in AC 220V + 15% range, connect the power control switch machine, the multimeter DC the voltage shift, the red pen then chip socket (5V power) 40 feet, the black pen socket 20 (GND), the voltage is 4.65V ~ 5.5V, if in this range, the system voltage is normal, turn