2006~2007 学年 上 学期段考题（2006~2007 academic year, semester, examination questions）.doc

2006~2007 学年 上 学期段考题（2006~2007 academic year, semester, examination questions） Documents from the network, I collected, finishing, and if there are omissions, errors, but also please correct me! 2006~2007 academic year, semester, examination questions A total of 3 pages, first pages Examinee attention: Examination subjects Mechanical design basis class Full name No. Any name, student number written in the binding line of the test paper void Loading: First, fill in the blanks (1 points per minute, 20 points) 1. in the four bar linkage mechanism, the necessary conditions for the existence of the crank is ___ _____ and ________ 2. in the design of cam mechanism, cam base circle radius is obtained ________, the designed mechanism more compact, but the pressure angle ________, the work mechanism of deterioration Whether the 3. four bar linkage has a stop point depends on whether it is collinear or not In the 4. mechanism, the two members are in contact with each other and are allowed to produce certain movable joints called kinematic pairs Flat low pairs are classified into two categories The three basic types of 5. hinged four bar mechanisms, and the foot driving mechanism of the household sewing machine, belong to the mechanism and are used as an active component 6. when the travel speed coefficient of the crank rocker mechanism is K 1, the mechanism has characteristics In the 7. cam mechanism, the cam is divided into three kinds according to its shape The cam in the thread take-up mechanism of the sewing machine is a cam The 8. pair refers to as to keep ________ contact between two components, and can produce some relative motion _______ In 9. _______ institutions, if the _______ bar on the opposite side of the rod as the frame, the two bar is connected with this is that a double rocker rocker. 10. swing guide bar mechanism, the crank for the driver, the maximum pressure angle is equal to the degree, the minimum transmission angle is equal to the degree Two, the mul