建筑工程后浇带的施工浅谈（Discussion on the construction of the post casting belt of building engineering）.docVIP

建筑工程后浇带的施工浅谈（Discussion on the construction of the post casting belt of building engineering） Construction on the construction of post cast zone Abstract: starting from the utility of the pouring belt, for the construction of the pouring belt construction such as analysis of the support of mould disassembly, concrete pouring, reinforced material and configuration and protection etc., play a good role in order to promote the post pouring belt. Key words: construction project; post pouring belt construction; In the annex and main building as one of the project, in order to eliminate the internal force of the structure because of differential settlement of the junction of annex and main building will be made after the construction of the pouring belt. Because in building construction, many special treatment brings a lot of inconvenience to the construction, in order to make the gap caused by the shortcomings can be overcome with permanent expansion, after the implementation of the pouring belt construction deformation and crack control and building settlement is uneven, the effect is very good. Type 1, after pouring After pouring as a temporary construction joints, generally used for treatment of cast-in-place reinforced concrete structure, which can overcome the unfavorable factors caused by the uneven settlement of the structure, temperature shrinkage. After pouring zone is generally divided into the pouring temperature, pouring, pouring settlement belt with shrinkage, can be used for the settlement of the high-rise building with podium low level differences between the treatment and solution caused by the shrinkage deformation of concrete temperature stress in the. Expansion of the pouring belt: treatment of cracks caused by concrete shrinkage and temperature changes. To transfer the settlement post cast band the podium and inconsistent settlement processing, can prevent the occurrence of cracking phenomenon. The temperature after pouring in temperature changes, the