常见电子元器件检测经验（Familiar with electronic component inspection experience）.docVIP

下载本文档

1
0
约1.14万字
约 8页
2017-09-02 发布于河南
举报
版权申诉

常见电子元器件检测经验（Familiar with electronic component inspection experience）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

常见电子元器件检测经验（Familiar with electronic component inspection experience）

常见电子元器件检测经验（Familiar with electronic component inspection experience） Familiar with electronic component inspection experience 1. measure the polarity of each foot of the rectifier bridge Multimeter R * 1K block, any pin probe connected to the black bridge, the red pen has measured the remaining three feet, if readings are infinite, while the black pen are connected to the positive output bridge, if the reading is 4 ~ 10K, while the black pen connected pin as an output anode bridge. The rest of the two pin to bridge the AC input end. 2. judge the quality of crystal oscillator First with a multimeter (R * 10K block) crystal at both ends of the measured resistance value, if it is infinite, that crystal without short-circuit or leakage; then the test pencil is inserted into a commercial power socket, either pin pinch with your fingers of the crystal, the other part of the metal pin touch test pencil tip, if the test pencil the neon red crystal that is good; if the neon bulb does not light, the crystal damage. 3. unidirectional thyristor detection Multimeter R * 1K or R * 100 gear measuring arbitrary poles ask reverse resistance, if you find a pair of low resistance resistance (100 ohm to LK Ohm), then the black pen connected to the control electrode of the red pen is connected to the cathode, another pole as the anode. There are 3 PN junctions in the thyristor. We can judge the quality of the PN junction by measuring the positive and negative resistance of PN junction. Measurement control (G) and [C) between the cathode resistor, if reverse resistance is zero or infinity, that control of short circuit or open circuit measurement; control (G) and anode (A) between the resistance, positive and negative resistance readings should be great; When measuring the resistance between the anode (A) and the cathode (C), both positive and negative resistances should be large. Polarity recognition of 4. bidirectional thyristor The bidirectional thyristor has 1 main electrodes, 2 mai