Feeding Concepts, Inc（喂养的概念,公司）.pdf

Feeding Concepts, Inc Vibratory Feeding Equipment Troubleshooting Manual Provided by: Feeding Concepts, Inc. 15235 Herriman Blvd. Noblesville, IN 46060 P- 317.773.2040 F- 317.773.1494 www.FeedingC sales@ Feeding Concepts Troubleshooting Manual 1 of 18- INDEX Vibratory Part Handling Terminology: 3 Vibratory Part Handling Terminology: 6 Base Drive Units 7 Storage Hopper 7 Gravity Tracks 7 Straight Line Vibratory Feeder 7 Escapement Installation and Trouble-Shooting Guide for Vibratory Feeder Bowls: 8 Causes for no Vibration 8 Causes for insufficient Vibration 10 Procedures for tuning Base Drive Units 12 Torque Requirements (Base Drive Unit) Installation and Trouble-Shooting for Vibratory Straight Line Drivers: 13 Causes for no Vibration 13 Causes for insufficient Vibration 15 Procedures for tuning Vibratory Straight Line Drivers Installation and Trouble-Shooting for Vibratory Hoppers: 16 Causes for no Vibration 16 Causes for insufficient Vibration 18 Procedures for tuning Vibratory Hoppers Feeding Concepts Troubleshooting Manual 2 of 18- VIBRATORY PART HANDLING SYSTEM TERMINOLOGY BASIC BOWL An untooled bowl consists of a vertical band and a domed bottom with either an external helical track or an internal helical track. The internal track can also be inverted. ANGLE SKIRT A conic section, calculated to fit at the required angle, attached between the bottom side of the track and the bowl wall to prevent parts from stacking and causing jams between the tracks. VIBRATORY FEEDER BOWL The vibratory feeder bowl is the basic bowl complete with internal or external to