Involute profile of noncircular gears Igor Chudov（非圆齿轮的渐开线齿廓Igor Chudov）.pdfVIP

1 Involute Profile of Non-Circular Gears Dr. Bálint Laczik Associate Professor Institute of Mechanical Engineering, College of Dunaújváros, 2401 Dunaújváros, Hungary e-mail: laczik@goliat.eik.bme.hu Abstract: This paper presents an approach to calculate lifework of Mr. F. L. Litvin [2] is a little-known the parameters of a family of noncircular gears. The part. In this work all basic questions of this special calculations of the general elliptical rolling curves are machinery elements are discussed exhaustively, but based on complex algebraic methods. Two methods was the applied calculation, construction and developed to calculate the contour curves of involute manufacturing methods are now anachronistic. In profile. The first based on the virtual manufacturing in a CAD system, while the second by determines the contour the corresponding chapters of new books [3-4] of curves analytically. These gears were manufactured by the author summarise the most important wire EDM technology. theoretical results of [2]. The articles [5], [6] reflect some issues of the new Keywords: non-circular, involute, elliptical gears, constructions and manufacturing techniques. The Maple, EDM [7] demonstrate