Service Master Plus Technical Data Parker （帕克服务主+技术数据）.pdf

Service Master Plus Technical Data CAN-bus Inputs Measured Value Storage • 2 CANbus networks with 8 inputs each • ~4,000,000 points per measurement (16 total) • 1,000,000,000 points total • Scanning Rate: 1 ms • On board storage 64 MB • Input Impedance: 1 kΩ • External: Micro SD memory card slot • M12x1, 5 pin push-in connector • External: USB mass storage device Analog Inputs Ambient Operating Conditions • Six SensoControl sensor inputs • Ambient temperature: 32° to 112 F° • Parker Automatic Sensor Recognition • Storage temperature: -10 to 140 F° • Scanning Rate: 1 ms • Relative humidity: 80 % • Input Impedance: 1 kΩ • Environmental test: IEC60068-2-32 (1 m, free fall) • Add two additional sensors with SCMA-VADC adaptor Type of Protection • Five-pin, push-pull connection • IP64 (to EN60529) Power supply • Internal Lithium ion pack, +7.4 VDC/4500 mAh Digital Input/Output • Charge Time: 3 hours • Active High: 7 to 24 VDC • Run time with fully charged battery: 8 hours • Active Low: Less than 1 VDC • External: 110/240 VAC – 24 VDC/2500 mA • Input Impedance: 1 kΩ • Vehicle adapter cable as accessory (12/24 VDC) • Output Current: -20 mA