System Electrical Parameters and Their Effects （系统电气参数及其影响）.pdfVIP

IEEE APEC Conference San Jose, CA March 1996 System Electrical Parameters and Their Effects on Bearing Currents Doyle Busse, Jay Erdman, Russel J. Kerkman, Dave Schlegel, and Gary Skibinski Allen Bradley Company 6400 W. Enterprise Drive Mequon, WI 53092 (414) 242 - 8263 FAX (414) 242 - 8300 Abstract - This paper examines ac motor shaft voltages and re- causing chemical changes within the lubricant. A recent in- sulting bearing currents when operated under Pulse Width vestigation was conducted by Chen, et al., on this EDM phe- Modulation (PWM) voltage source inverters. The paper reviews nomenon [5]. Recently, the authors presented their findings the electrical characteristics of bearings and motors that cause on EDM and its relationship to PWM inverter operation shaft voltages and bearing currents. A brief review of previous work is presented, including a system model for electrical analysis [6,7]. The authors suggested the sources for Rotor Shaft to of bearing currents. Relying on the work of a companion paper, Ground Voltage ( Vrg) include electrostatic charge build up the propensity for Electric Discharge Machining (EDM) is deter- and capacitive coupling. These studies resulted in an electri- mined by a design equation that is a function of system compo- cal model of the inverter, motor, and bearing system, and the nents. Per