还原卡的原理（The principle of a Restore Card）.docVIP

还原卡的原理（The principle of a Restore Card） The principle of a recovery card is to gain control of the machine before the operating system starts. The users operation on the hard disk is not actually the modification of the original data, but the operation of the virtual space of the restore card, so as to achieve the function of protecting the data of the system. The simple function of the hard disk restore card occupies more system resources, requiring the hard disk has a lot of space to spare, and has been gradually eliminated. Now the network reduction card, the card to achieve reduction card, combined with the network and reduction technology, boot shutdown, restart, restore, copy, monitor, remote control and other functions. The interface supports a data copy and hundreds of machines, can reach MB per second, compared with the traditional maintenance method is time-saving, can provide support for large scale cluster management. The system can be used to restore the card, computer or other partitions to protect partition protection, can be set for the next time you start to restore the card or after a certain time the system automatically restored, so, during the period of the system change will not exist, not every system after a period of time because of all sorts of reasons caused by system disorders, often appear blue screen and had to reinstall the system again the pain. It also makes sense for skilled users, not to mention the new ones. Of course, the restore card also provides installation mode to install new software that needs to be used properly. In fact, as far as the authors experience is concerned, using a restore card is even more convenient than using GHOST software to restore the system. Even if you need to install and uninstall some software regularly, you can easily restore the system with a restore card. You can set the restore card to restore once a week, if you need to restore, change the system time, then the next boot, the system will automat