Thermal Analysis Of Rotor Disc Of Disc Brake Of （热分析盘式制动器的转子盘）.pdf

International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 International Conference On Emerging Trends in Mechanical and Electrical Engineering (ICETMEE- 13th-14th March 2014) RESEARCH ARTICLE OPEN ACCESS Thermal Analysis Of Rotor Disc Of Disc Brake Of Baja Sae 2013 Car Through Finite Element Analysis 1 2 3 ISHWAR GUPTA , GAURAV SAXENA , VIKAS MODI 1 M.Tech. (Automobile Engineering) Research Scholar RJIT BSF ACEDEMY Tekanpur, Gwalior, MP, India 2 Asst. Prof., Automobile Engineering Department RJIT BSF ACEDEMY Tekanpur, Gwalior, MP, India 3 B.Tech. (Mechanical Engineering) ITM UNIVERSE Gwalior, MP, India Abstract— This paper deals with thermal analysis through finite element analysis of rotor disc of disc brake of BAJA SAE 2013 Car. Generally brake systems are designed to apply artificial frictional resistance to the rotating member in order to stop the rotational motion of a vehicle. The rotor discs are commonly manufactured of grey cast iron[1]. The SAE also recommend grey cast iron for various applications[2]. So cast iron is being selected for analysis. The objective of thermal analysis of rotor disc is to study the temperature distribution related thermal quantities such as thermal fluxes thermal gradients to evaluate the performance under severe conditions. In this present work, an attempt has been made to suggest best combination of parameters of rotor disc like Material composition, Flange Width Wall Thickness.