Wiremesh Substrates for Oxidation, TWC and （金属丝网底物氧化,TWC和）.pdfVIP

Wiremesh Substrates for Oxidation, TWC and SCR Converters Sivanandi Rajadurai, Shiju Jacob, Chad Serrell , Rob Morin and Zlatomir Kircanski ACS Industries Abstract Metallic monolithic converters using thin metal foils of ferritic iron-chromium-aluminum alloys and other materials are also used in catalytic converters [10,11]. Different types/shapes of catalyst The primary requirements of exhaust after treatment systems are carriers are also used for improved emission performance of the low back pressure, low system weight, better emission performance catalytic converters [12, 13]. Although geometric surface area and and lower cost. Combinations of these properties provide better open frontal area are two major design criteria of the conventional engine performance and higher system value. Knitted wiremesh honeycomb substrate, the light-off efficiency depends more on the substrates with different geometry and channels are used as car- mass and heat transfer coefficients. This is true in the case of the riers of diesel oxidation catalyst, three way catalyst and selective non-conventional substrates such as wiremesh since the flow ge- catalytic reduction (SCR) NOx catalyst. Wiremesh materials are