LED准直照明及自由曲面透镜设计.docVIP

LED准直照明的自由曲面透镜设计 Jin-Jia Chen, Te-Yuan Wang, Kuang-Lung Huang, Te-Shu Liu, Ming-Da Tsai, and Chin-Tang Lin 1、电气工程学院国立彰化师范大学系，士达路，彰化50074，台湾 2、光电与能源工程，明道大学，369文华?路，Peetow，彰化52345，台湾 * jjchen@cc.ncue.edu.tw 摘要：我们提出一个简单的镜头自由曲面设计方法应用到LED照明的准直。该方法是从基本的几何光学分析及施工方法得出。通过使用这种方法，一个高度准直透镜与为1.0mm×1.0毫米LED芯片的尺寸和86.5％下的±5度的视角的光学模拟的效率构成。为了验证该透镜的实用性能，准直透镜的原型也制成，并且90.3％具有4.75度的射束角的光学效率被测量。 ?2012美国光学学会 OCIS代码：（220.2740）几何光学设计; （220.4298）非成像光学系统; （220.2945）照明设计; （230.3670）发光二极管。 参考文献 H. Ries and J. Muschaweck, “Tailored freeform optical surfaces,” J. Opt. Soc. Am. A 19(3), 590–595 (2002). P. Benítez, J. C. Mi?ano, J. Blen, R. Mohedano, J. Chaves, O. Dross, M. Hernández, and W. Falicoff, “Simultaneous multiple surface optical design method in three dimensions,” Opt. Eng. 43(7), 1489–1502 (2004). Y. Ding, X. Liu, Z. R. Zheng, and P. F. Gu, “Freeform LED lens for uniform illumination,” Opt. Express 16(17),12958–12966 (2008). L. Sun, S. Jin, and S. Cen, “Free-form microlens for illumination applications,” Appl. Opt. 48(29), 5520–5527 (2009). F. R. Fournier, W. J. Cassarly, and J. P. Rolland, “Fast freeform reflector generation usingsource-target maps,” Opt. Express 18(5), 5295–5304 (2010). W. Zhang, Q. Liu, H. Gao, and F. Yu, “Free-form reflector optimization for general lighting,” Opt. Eng. 49(6), 063003 (2010). G. Wang, L. Wang, L. Li, D. Wang, and Y. Zhang, “Secondary optical lens designed in the method of source-target mapping,” Appl. Opt. 50(21), 4031–4036 (2011). V. Medvedev and W. A. Parkyn, Jr., “Screen illumination apparatus and method,” US Patent 6166860 (2000). D. Weigert and D. Chin, “Spotlight with an adjustable angle of radiation and with an aspherical front lens,” US Patent 6499862 B1 (2002). A. Domhardt, S. Weingaertner, U. Rohlfing, and U. Lemmer, “TIR Optics fornon-rotationally symmetric illumination Design,” Proc. SPIE 7103, 710304, 710304-11 (2008). J.-J. Chen and C.-T. Lin, “Freeform surface design for a