主机通电后风扇转主机不启动的故障详细解析（After the main engine is powered on, the fan is turned to the main engine and the fault is not solved）.docVIP

下载本文档

5
0
约1.33万字
约 10页
2017-09-05 发布于河南
举报
版权申诉

主机通电后风扇转主机不启动的故障详细解析（After the main engine is powered on, the fan is turned to the main engine and the fault is not solved）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

主机通电后风扇转主机不启动的故障详细解析（After the main engine is powered on, the fan is turned to the main engine and the fault is not solved）

主机通电后风扇转主机不启动的故障详细解析（After the main engine is powered on, the fan is turned to the main engine and the fault is not solved） After the main engine is powered on, the fan is turned to the main engine and the fault is not solved 1 、 power switch fault When the power switch button because aging cannot be reset or chassis front panel power switch button is pressed because of deformation caused can not be reset, using the switch is in the on state, then there will be a press the power switch, the host power started, but after 4 seconds after the automatic shutdown. If there is a short circuit on the relevant line of the power switch, when we connect the plug of the main power supply, the host will power up and turn off automatically after 4 seconds. The check method is to unplug the panel switch connected with the main board PW_ON interface after starting, and directly connect the jumper with a small screwdriver to see if the host still has 4 seconds shutdown. If the fault disappears, it can be concluded that the switch circuit is faulty. 2 、 RESET switch or jumper is shorted Although such failures appear much of a chance, but with the increase of computer use time, non self locking button switch RESET button will appear after the failure because of the elastic press cannot bounce, causing always on state; or because the chassis front panel button on the installation is not in place or deformation, resulting in RESET switch button is pressed, not timely reset, long time is on; then we pulled because of the repair process, plug accidentally caused the RESET line short circuit. Then, when we press the power switch, because the motherboard is always in the reset state, although the power has been turned on, and the power supply fan CPU fan, graphics card fan, motherboard fan began to work, but the host without any starting signs. If we have a DEBUG card into the PCI slot, we will immediately find the reset lamp always highlighted, you can immediately determine the RESET powe