如何加速xp启动（How to speed up XP startup）.docVIP

如何加速xp启动（How to speed up XP startup） V4 has done to optimize the boot speed, normal configuration may not start when the progress of rolling over 3 laps, but in some circumstances also need to manually set up (especially the first set of IDE channels, a main reason is usually more than five rolling circle) For the first time into the desktop slow phenomenon usually follow the second way set can be solved, which is lead to specific user environment problems. Remove unnecessary hardware detection [Edit] cancel IDE automatic detection In the part of the machine, the boot device to be used to detect IDE seconds. Open the system properties, hardware, device manager, IDE ATA/ATAPI, click on the main controller IDE channel to advanced settings (Figure), the current transfer mode does not apply all types of equipment from automatic detection to no, ok. As for secondary processing IDE fellow. Description: Windows system can bypass the BIOS settings to test equipment, so in the BIOS setting to disable IDE devices can only improve the speed of BIOS hardware detection machine. Recommended both settings. [Edit] avoid unnecessary plug detection If not necessary, do not start in CD-ROM is placed in the optical disc Unplug the U disk, digital camera will save the boot time of detection. [edit]BIOS optimization Optimization of the BIOS entries. See Synonyms at BIOS. . [Edit] optimization of automatic detection of network connection [Edit] cancel automatically set IP Windows XP system is developed on the basis of Windows 2000, will automatically detect whether into the LAN in the boot. For single use, the system will take a long time to search for a DHCP server to obtain IP address, which caused the desktop display after a long time no response. As the local connection can automatically assign IP addresses to avoid artificial network detection, thus speeding up the start. [method] right click on the network neighborhood to attribute, right click on the local connection, double-click