如何安装和调试摄像头(How to install and debug camera).docVIP

如何安装和调试摄像头(How to install and debug camera).doc

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
如何安装和调试摄像头(How to install and debug camera)

如何安装和调试摄像头(How to install and debug camera) 1. lens mounted: The camera must be connected with the lens before use, should according to the actual situation of the application site to match the lens, such as lens or zoom lens, manual iris lens or auto iris lens, standard lens or wide-angle or telephoto lens. It should also pay attention to the lens and the camera interface, C interface or CS interface, C interface and CS type screw type interface lens are 1 inches 32 teeth, 1 inches in diameter, the difference is the distance from the target surface, CCD lens, C type mounting seat from the datum to the focal distance of 17.562 mm, than the CS distance CCD target a special loop length, CS distance of 12.5 mm focal distance. Do not underestimate this one circle, without it, the lens and the camera will not be able to properly focused, blurred image. So in front of the camera installation, first look at the camera and the lens is not the same kind of interface, if not, you need to change according to the specific circumstances of the connecting ring. Some camera without answering the ring, and the afterimage regulation loop regulation, use a screwdriver to loosen the adjustment screw ring, turn the ring at the CCD target surface mounting base will be relatively backward (front) movement, also play a role of connecting ring. Install the camera, remove the camera lens and the first protective cover, and then gently screwed into the camera lens interface and make the place. The auto iris lens, should also be connected to the control line lens automatic aperture camera interface, for two or three variable electric variable lens lens, as long as the rotation of the lens in place temporarily without correcting the balance (only after the focus after the adjustment to the final equilibrium correction). 2. adjust the lens aperture and focus: Turn the camera on the electronic shutter and backlight compensation switch, the camera aligned to surveillance scene, adjust the apertur

文档评论(0)

f8r9t5c + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档