cad制图（CAD mapping）.docVIP

cad制图（CAD mapping） As we all know, in the absence of building software, 3D model is simply to create multi-storey buildings in AutoCAD, is very troublesome, even to get proficient touyunnaozhang. From the AutoCAD2007 version, added many 3D functions, especially multi segment and sweep command, provides a handy tool for rapid modeling of architects, the rapid modeling problem of multi-storey buildings now. Have a house two years ago produced by the AutoCAD rendering of the building renderings, as shown in figure 1. The multi-storey building curtain wall, building with no professional software is only used 8 ACAD command quickly established a 3D model. Which of the 8 command? 1, with the pline of multi line command designated wall axis and hole of a parallel line. 2, Polysolid multi section command, the parallel line axis and hole formation has the height and thickness of walls and windows and doors block solid. 3, with move mobile command Windows Mobile or mobile portal block floor. 4, with subtract difference sets command, dig a hole in the wall of windows and doors. 5, with the insert insert commands into three-dimensional block windows and doors. 6, 3darray three-dimensional array command, a standard array for buildings, multi-storey buildings. 7, with the box rectangular command, canopy roof and floor solid drawing. And set command to rectangular roof is a concave roof with a parapet. 8, use the fillet command to be rounded on the cornice, rounded canopy. A town known sewing factory single staff dormitory, the front and the left and right side facing the street, houses connected to the bottom of the store, the height of 4.2 meters, 2 to 4 layers of staff quarters, the height of 3 meters, the roof parapet generation of archaize glazed tile roof arc. The 3D effect graph above two planar graphs as follows, try to establish 3D model of buildings? Figure 2 the original bottom floor plan Figure 3 the original standard floor plan Because just for modeling, and not provi