dos下修复硬盘坏道（DOS hard disk repair）.docVIP

dos下修复硬盘坏道（DOS hard disk repair） DOS hard disk repair 1. the system comes with tools to solve ScanDisk ScanDisk is hard to solve the logical defects most commonly used method, The common format command cannot repair effect on any hard disk, we need to understand this. If the hard disk bad sectors, we can be in the windows system environment, in my computer chosen to deal with Hard disk drive, select properties, in the tool button select check state, click start check, The scan type selected, a comprehensive inspection and automatic repair error option is selected, and then click start You can. It will be complete for hard disk scanning, and the possible bad clusters for automatic correction. Secondly， In DOS, the hard disk has bad sectors, the computer startup - will automatically run the ScanDisk scan, and The bad clusters in black red B (bad). Of course, if the system at startup disk scanning or not Can not enter the windows system, we also use a floppy disk or CD-ROM and boot the computer, in the corresponding letter, As a run ScanDisk (note is to scan the hard disk drive), then enter the corresponding repair hard to scan Disk partition repair. 2. third party tools to solve some other disk repair tools, such as Norton toolbox The NDD (Disk Doctor) and the most commonly used pctools and other tools for scanning and repair the hard disk bad sectors The method, its usage is very simple, many newspapers are introduced, we can try to find. 3. if the hard disk method to hide bad sectors appear unable to repair the bad clusters or physical bad sectors, we used some soft disk Will these bad sectors into a separate area and hidden, so you can make a lot of hard to extend the normal use. Life. One example, there is a serious physical bad sectors hard 4.3GB 2GB, with format format is not in the past, ScanDisk or NDD is not detected in the past, but the normal partition. Find a partition formatted smart fdisk software, Boot the computer, enter the letter A, run the software